Rosemount 8800 Reducer Vortex Flowmeter
Rosemount Vortex Flowmeters allow you to achieve better measurement practices across your applications by eliminating potential leak points, incorporating gasket-free meter body designs that are immune to vibration, and enabling best installation practices with the Reducer™ Vortex
By building the reducers into the meter, the Reducer Vortex can measure lower flows than any other Vortex meter. The benefit is simplified installations which reduce project risk andminimize installation costs.
The face-to-face dimensions of the 8800 Reducer Vortex match that of the 8800 Traditional Vortex. As estimated process conditions change during projects you can switch between the Reducer Vortex and 8800 Traditional Vortex with no piping changes.
Features & Benefits
Rosemount Reliability - Designed with same electronics,sensor, and meter body as the 8800. Reduced Cost - Eliminates field assembly and welding of separate reducers and piping reducing installed costby as much as 50%. Extended Measurable Flow - Low-end flow range is doubled with the Rosemount 8800 Reducer Vortex. Reduced Project Risk - Reducer Vortex and the Traditional Flanged Vortex have the same face-to-face dimension. As a result either meter can be used without affecting pipe layout. Available as flanged meter for 1 through 12 inch stainless steel and nickel alloy C materials of construction. Available with HART® & FOUNDATION™ fieldbus protocols |
Specifications
Key Specifications | |
Flowmeter Accuracy | ± 0.65 % of rate for liquids (±1.00% for line size 6-in (150 mm) and greater) ± 1% of rate for gas and steam (±1.50% for line size 6-in (150 mm) and greater) |
Turndown | 38:1 |
Output |
|
Wetted Material | Stainless Steel - 316/316L and CF3M Nickel Alloy - C-22 and CW2M Consult factory for other wetted material options |
Flange Options | ANSI Class 150 to 900 DIN PN 10 to PN 160 JIS 10K to 40K Flanges are available in a variety of facings |
Operating Temperatures | -330°F to 800°F (-200°C to 427°C) |
Line Size | Flanged - 1-in to 12-in (25 to 300 mm) |