Rosemount Thermocouples: Metric/DIN-Style (185, 1067)
Thermocouple Temperature Sensors may be ordered as complete assemblies, which provide a complete, yet simple, means of specifying the proper industrial hardware for most temperature measurements. One assembly model number, derived from one ordering table, completely defines the type of sensing element, as well as the material, length, and style of extension fittings and thermowells. All sensor assemblies are sized and inspected by Emerson to ensure complete component compatibility and performance.
Every Metric style thermocouple is part of our global network ensuring a globally consistent, high quality product every time.
Features & Benefits
-Fully potted and sealed wiring connections
-High performance sensor element technology for accurate, vibration-resistant operation
-Accredited, global calibration facilities with traceability to international standards
-Manufacturing capacity for your largest and most complex projects
-Complete assembly of thermocouple, thermowell, extension, and transmitter
-Wake frequency calculations
Specifications
| Temperature Range | -50 to 450 C or -196 to 600 C depending on type |
| Self Heating | 0.15 K/mW when measured per method defined in DIN EN 60751:1196 |
| Thermal Response Time | 9 seconds maximum required to reach 50% sensor response when tested in flowing water according to IEC 751 |
| Immersion Error | 60 mm minimum usable depth of immersion when tested according to IEC 751 |
| Insulation Resistance | 1.000 MΩ minimum insulation resitance when measured at 500 Vdc and at room temperature |
| Sheath Material | 316 SST / 321 SST with mineral-insulated cable construction |
| Lead Wire | PTFE insulated, sliver-coated cooper wire. |